628Ah Capacity for High-Demand Fleet Work
Rated at 51.2V and 628Ah, the LiFePO₄ pack provides approximately 32.15 kWh of nominal energy (calculated). The 51.2V 628Ah warehouse battery is intended for material-handling fleets with substantial onboard energy requirements.
A 3.14-Hour Charge Window for Shift Planning
The specified 3.14-hour charge time and 200A charge current give fleet planners a clear input for shift scheduling. For a 51.2V 628Ah warehouse battery, actual charging time depends on charger output, starting state of charge and operating conditions.
Four Warehouse Vehicle Applications
The supplied application visuals show electric pallet trucks, stackers, reach trucks and order pickers. This 51.2V 628Ah warehouse battery targets warehouse and logistics equipment; verify compartment dimensions, counterweight needs and peak current before vehicle selection.
Core Specification
| Parameter | Specification |
|---|---|
| Nominal Voltage | 51.2V |
| Rated Capacity | 628Ah |
| Nominal Energy | Approx. 32.15kWh |
| Battery Chemistry | LiFePO4 (16S2P) |
| Cycle Life | ≥5,000 cycles |
| Charging Specifications | 58.4V, 200A |
| Discharging Specifications | 40–58.4V, 314A |
| Operating Temperature | -15°C to 60°C |
| Battery Construction | High-strength housing, sealed protection, industrial connector and lifting handle |
| Applications | Warehouse forklifts, reach trucks, stackers and industrial material-handling equipment |
Compare Lifetime Cost
The product comparison graphic lists ≥5,000 cycles, ≥95% efficiency, maintenance-free operation and a -15°C to 60°C operating range. When comparing the 51.2V 628Ah warehouse battery with lead-acid, validate these figures against the same duty cycle.
Inside the 16S2P Pack: Ratings and Protection
The 16S2P LiFePO₄ pack lists 58.4V charge voltage, 40–58.4V discharge range, 200A charge, 314A discharge and 628A maximum continuous charge/discharge currents. The graphic also shows a high-strength sealed case, reliable connector, lifting handle and cable protection.
Fit the Battery to the Truck
FEBATT reviews the 51.2V 628Ah warehouse battery against vehicle dimensions, connector type and charger requirements before prototyping. BMS protection covers overcharge, over-discharge, overcurrent, short circuit and temperature; UN38.3, MSDS and CE are listed. The workflow covers requirement analysis, solution design, prototype build, testing and validation, mass production and after-sales support.








