Home > Power Battery > Mini Car Battery > 60V 314Ah Mini Car Battery for High-Capacity Fleet Projects

60V 314Ah Mini Car Battery for High-Capacity Fleet Projects

  • 18.84 kWh Energy Reserve: The 60V 314Ah mini car battery provides 18.84kWh nominal energy in a LiFePO4 configuration for compatible low-speed vehicles.
  • 100A Continuous Output: Match discharge current to the controller, motor demand and payload before confirming vehicle suitability.
  • Bluetooth BMS Visibility: Check charge level and receive phone fault alerts, helping fleet teams monitor battery status.
  • Outdoor-Ready Operation: The illustrated configuration specifies IP65 protection and a -20°C to 45°C operating range; verify the sealed configuration and site conditions.
  • Long-Cycle Fleet Planning: With a stated 3,500+ cycles and no electrolyte top-ups, the 60V 314Ah mini car battery supports lower routine upkeep across minicar, golf cart and cargo-trike fleets.

18.84 kWh for Energy-Intensive Routes

The 60V 314Ah mini car battery provides 18.84 kWh of nominal energy for low-speed vehicles with substantial daily energy demand. Use route distance, payload, terrain, stop frequency and auxiliary loads to estimate usable energy; nominal capacity alone cannot guarantee a stated range.

60V 314Ah mini car battery overview

Give Fleet Teams a Battery Status View

With Bluetooth BMS monitoring, the 60V 314Ah mini car battery lets operators check charge level and receive fault alerts by phone, as shown in the product graphic. Confirm app compatibility, supported data fields and alert behavior with the target fleet’s devices before specifying the monitoring package.

60V 314Ah mini car battery Bluetooth BMS

Separate Vehicle Roles Before Sizing

Minicars, golf carts and cargo trikes have different payloads, route patterns and peak loads. Assess this pack against each vehicle’s daily duty cycle, controller demand and available charging window instead of assuming one configuration will suit every platform.

60V 314Ah mini car battery applications

Core Specifications

Parameter Specification
Nominal Voltage 60V
Rated Capacity 314Ah
Nominal Energy 18.84kWh
Battery Chemistry LiFePO4
Continuous Discharge Current 100A
BMS Monitoring Bluetooth, charge-level viewing and fault alerts
Cycle Life 3,500+ cycles
Ingress Protection IP65
Operating Temperature -20°C to 45°C
Charging Compatible lithium charger
Applications Minicars (LSVs), Golf Carts, Electric Cargo Tricycles

Compare the Conversion, Not Just the Pack

The comparison graphic highlights fewer electrolyte top-ups, a consolidated pack and phone-based status checks. For the 60V 314Ah mini car battery, compare conversion costs using verified labor, charger, usable-energy and replacement data; do not treat general savings percentages as guaranteed fleet results.

60V 314Ah mini car battery comparison

Check the 100A Output Path

The product images specify 60V, 314Ah, 18.84kWh and 100A continuous discharge, alongside a high-current connector. Before selecting the 60V 314Ah mini car battery, match controller limits, motor demand, cable rating and connector interface to the vehicle’s electrical design.

60V 314Ah mini car battery specifications

Specify the Site Conditions

The illustrated configuration states IP65 protection, a -20°C to 45°C operating range and 3,500+ cycles. For the 60V 314Ah mini car battery, verify the sealed configuration, cycle-test depth of discharge and temperature conditions before using these figures in a fleet specification.

Turn OEM Drawings Into a Test Plan

For a 60V 314Ah mini car battery project, FEBATT can review BMS settings, Bluetooth alerts, pack assembly, connectors, vehicle matching and validation criteria against OEM drawings. Define current limits, app functions, enclosure dimensions and acceptance tests before sample approval and repeat production.

60V 314Ah mini car battery OEM workflow
60V 314Ah mini car battery protection

360° Safety: The "Sentinel" BMS

Safety isn’t an afterthought; it’s built into the hardware. Our Advanced Battery Management System protects against

Advanced Smart BMS Protection

The built-in Battery Management System provides comprehensive safety and performance control, including:
360 Safety The Sentinel BMS-Febatt

Core Advantages

Deep OEM & ODM Customization

As a direct manufacturer, we provide:
Enclosure and structural customization
Branding, labeling, and packaging design
Technical documentation and certification support
Complimentary design services for long-term partners
Febatt Power Battery Core Advantage

Certificate

Pre-integrated UN38.3, GPSR, CE, MSDS, ISO9001,and other certifications to shorten market access cycles

ISO9001
MSDS
UN38.3
A Two-Wheeler Charger
A Two-Wheeled Vehicle Fast-Charging Station — Utility Model Certificate
A Self-Diagnostic Photovoltaic Battery Swapping Cabinet and Method of Use
A Lithium Battery Fixing Device
A Height-Adjustable Fast-Charging Station for Two-Wheeled Vehicles
Vehicle-Mounted Power Lithium Battery and Its Charging and Discharging Method

Wholesale Process

01.

Inquiry Reception And Needs Analysis
2 Febatt Wholesale Process

02.

Technical Proposal And Quotation
3 Febatt Wholesale Process

03.

Sample Validation And Testing
4 Febatt Wholesale Process

04.

Contract Negotiation And Signing
5 Febatt Wholesale Process

05.

Deposit Payment And Production Scheduling
6 Febatt Wholesale Process

06.

Production Monitoring And Final Inspection
7 Febatt Wholesale Process

07.

Logistics Arrangement And Balance Payment
8 Febatt Wholesale Process

08.

After-Sales Service And Long- Term Partnership

Quality Control

FAQ

Q1: What battery type is commonly used in low-speed electric vehicles?
A: FEBATT commonly uses LiFePO4, also known as lithium iron phosphate or LFP, for low-speed electric vehicles because it offers strong thermal stability, stable voltage output, long cycle-life potential, and low routine maintenance.
A:  LiFePO4 batteries offer lower weight, more usable capacity, faster compatible charging, stable power output, longer cycle-life potential, and less routine maintenance than traditional lead-acid batteries used in low-speed vehicles.
A: Yes, a LiFePO4 battery can replace many AGM or lead-acid systems when the voltage, dimensions, current requirements, connectors, controller, charger, wiring, and mounting structure are properly matched to the vehicle.
A: The battery voltage, continuous current, peak current, capacity, connector, BMS settings, and communication protocol should be matched with the motor power, controller limits, acceleration demand, climbing requirements, and expected driving range.
A:  Yes. FEBATT can customize battery voltage, capacity, dimensions, enclosure, connectors, cable direction, mounting points, BMS functions, CAN or RS485 communication, labeling, and other specifications for OEM and ODM projects.
A: Depending on the selected configuration, the FEBATT BMS can provide overcharge, over-discharge, overcurrent, short-circuit, temperature protection, cell balancing, state-of-charge monitoring, fault reporting, and CAN or RS485 communication.
A:  Depending on the cell model and operating conditions, a FEBATT LiFePO4 battery may provide approximately 2,500–8,000 cycles before capacity declines to around 70–80%, with a possible service life of 5–10 years or longer under suitable use.
A:  Yes. The charger voltage and charging profile must be compatible with the LiFePO4 battery and BMS. An existing lead-acid charger should only be used when its charging parameters meet the battery manufacturer’s requirements.
A: Depending on the battery model and destination market, FEBATT can provide relevant product specifications, test records, UN38.3 transport documentation, MSDS or SDS, and applicable CE, UL, or other compliance documents.
A: Standard FEBATT LiFePO4 batteries can support discharge operation across a broad temperature range, with some models rated from approximately −20°C to 60°C. Low-temperature charging protection, heating functions, or ruggedized designs can be configured for more demanding environments.

IGNITE YOUR COUNTRY'S LITHIUM BATTERY & ENERGY STORAGE MARKET WITH FEBATT

FEBATT, a professional manufacturer and provider of lithium battery energy storage solutions, is committed to delivering high-performance, reliable battery systems to the global market. We are excited to invite you to join us as an exclusive partner in your country or region to collaboratively develop the clean energy storage market and create a steadily growing business together.
When you partner with us, you will enjoy:
Priority Order Processing & Shipping — Respond swiftly to local demand and seize market opportunities with priority processing.
Product Customization Support — We will assist in designing and producing battery solutions tailored to your brand, starting from your very first order.

We have already successfully supported partners across multiple regions in achieving brand growth and increasing profitability. Whether you are a systems integrator, electrical distributor, or entrepreneur looking to build your own brand, FEBATT is your reliable partner, offering stable products and flexible cooperation mechanisms.

Comprehensive Product Range Support — From truck parking batteries to 12V/24V general-purpose lithium batteries, power batteries, and custom solutions, we offer a wide range of products suited for various applications.

Partner with us to deliver reliable energy solutions for businesses and build a sustainable green energy future together.

Contact us now to receive a customized partnership proposal and detailed product information.

Ready to Partner with FEBATT?

Join hundreds of B2B partners worldwide who trust us for reliable lithium battery solutions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Scroll to Top

Professional Battery Solution Supplier

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.