Home > Power Battery > Mini Car Battery > 76.8V 200Ah Lithium Battery for Low-Speed Mini Cars

76.8V 200Ah Lithium Battery for Low-Speed Mini Cars

  • Energy Within a Defined Footprint: The 76.8V 200Ah mini car battery offers 15.36 kWh in an elongated enclosure for commercial low-speed vehicles.
  • Controller Load Screening: 100A continuous and 200A maximum discharge ratings help buyers assess traction demands without assuming peak performance is continuous.
  • Chassis Installation Planning: Its 1,138 × 410 × 253 mm housing and 125 kg weight call for structural, clearance and handling checks.
  • Outdoor Fleet Resilience: IP67 protection addresses dust and water exposure, while a stated 6,000-plus cycle rating supports lifecycle reviews pending test-condition verification.
  • OEM Fit Verification: Before sourcing the 76.8V 200Ah mini car battery, confirm voltage compatibility, charger settings, terminal arrangement and mounting provisions.

15.36 kWh in a Long-Format Pack

The 76.8V 200Ah mini car battery carries 15.36 kWh of nominal energy in an elongated housing. For OEMs packaging power beneath low-speed vehicles, this combination makes battery-bay geometry and usable energy assumptions essential parts of route and chassis planning.

76.8V 200Ah mini car battery for low-speed vehicles

Screen Controller Loads Before Purchase

A 100A continuous and 200A maximum discharge rating gives buyers a clear electrical screening range. Confirm hill-start demand, accessory loads and peak-current duration before pairing the 76.8V 200Ah mini car battery with a particular controller; nominal capacity alone cannot establish vehicle compatibility.

76.8V 200Ah mini car battery use and upkeep

Three Vehicles, Three Duty Profiles

Neighborhood minicars cycle through frequent stops; golf carts face varying terrain; sightseeing shuttles carry changing passenger loads. The 76.8V 200Ah mini car battery can be evaluated for each application, provided the OEM separately validates energy demand, electrical compatibility and installation space.

76.8V 200Ah mini car battery fleet applications

Core Specifications

Parameter Specification
Nominal Voltage 76.8V
Rated Capacity 200Ah
Nominal Energy 15.36 kWh
Continuous Charge Current 100A
Continuous Discharge Current 100A
Maximum Charge Current 200A
Maximum Discharge Current 200A
Cycle Life >6,000 cycles
Ingress Protection IP67
Weight 115 kg
Dimensions (L × W × H) 1138 × 410 × 253 mm
Weight 125 kg
Applications Low-Speed Electric Vehicles (LSVs), Mini Cars, Golf Carts, Sightseeing Shuttles

Build a Defensible Ownership-Cost Case

One integrated lithium enclosure eliminates flooded lead-acid watering and multiple battery interconnections. The stated 6,000-plus cycles offer an input for lifecycle models, but claims about charging time, weight savings or years of service require comparable test data before procurement decisions.

76.8V 200Ah mini car battery vs lead-acid bank

Verify the 1,138 mm Battery Bay

The 76.8V 200Ah mini car battery measures 1,138 × 410 × 253 mm and weighs 125 kg. Its mounting flanges, top handles and terminal fittings demand checks for chassis clearance, lifting access, fastening strength and cable routing; IP67 addresses enclosure ingress protection.

76.8V 200Ah mini car battery housing and fittings

Approve Samples Before Standardizing

Translate the vehicle drawing into a signed acceptance checklist: battery envelope, terminal orientation, charger settings, current limits and mechanical fastening. For the 76.8V 200Ah mini car battery, request sample verification and test records before approving repeat orders across a vehicle platform.

76.8V 200Ah mini car battery OEM validation steps

360° Safety: The "Sentinel" BMS

Safety isn’t an afterthought; it’s built into the hardware. Our Advanced Battery Management System protects against

Advanced Smart BMS Protection

The built-in Battery Management System provides comprehensive safety and performance control, including:
360 Safety The Sentinel BMS-Febatt

Core Advantages

Deep OEM & ODM Customization

As a direct manufacturer, we provide:
Enclosure and structural customization
Branding, labeling, and packaging design
Technical documentation and certification support
Complimentary design services for long-term partners
Febatt Power Battery Core Advantage

Certificate

Pre-integrated UN38.3, GPSR, CE, MSDS, ISO9001,and other certifications to shorten market access cycles

ISO9001
MSDS
UN38.3
A Two-Wheeler Charger
A Two-Wheeled Vehicle Fast-Charging Station — Utility Model Certificate
A Self-Diagnostic Photovoltaic Battery Swapping Cabinet and Method of Use
A Lithium Battery Fixing Device
A Height-Adjustable Fast-Charging Station for Two-Wheeled Vehicles
Vehicle-Mounted Power Lithium Battery and Its Charging and Discharging Method

Wholesale Process

01.

Inquiry Reception And Needs Analysis
2 Febatt Wholesale Process

02.

Technical Proposal And Quotation
3 Febatt Wholesale Process

03.

Sample Validation And Testing
4 Febatt Wholesale Process

04.

Contract Negotiation And Signing
5 Febatt Wholesale Process

05.

Deposit Payment And Production Scheduling
6 Febatt Wholesale Process

06.

Production Monitoring And Final Inspection
7 Febatt Wholesale Process

07.

Logistics Arrangement And Balance Payment
8 Febatt Wholesale Process

08.

After-Sales Service And Long- Term Partnership

Quality Control

FAQ

Q1: What battery type is commonly used in low-speed electric vehicles?
A: FEBATT commonly uses LiFePO4, also known as lithium iron phosphate or LFP, for low-speed electric vehicles because it offers strong thermal stability, stable voltage output, long cycle-life potential, and low routine maintenance.
A:  LiFePO4 batteries offer lower weight, more usable capacity, faster compatible charging, stable power output, longer cycle-life potential, and less routine maintenance than traditional lead-acid batteries used in low-speed vehicles.
A: Yes, a LiFePO4 battery can replace many AGM or lead-acid systems when the voltage, dimensions, current requirements, connectors, controller, charger, wiring, and mounting structure are properly matched to the vehicle.
A: The battery voltage, continuous current, peak current, capacity, connector, BMS settings, and communication protocol should be matched with the motor power, controller limits, acceleration demand, climbing requirements, and expected driving range.
A:  Yes. FEBATT can customize battery voltage, capacity, dimensions, enclosure, connectors, cable direction, mounting points, BMS functions, CAN or RS485 communication, labeling, and other specifications for OEM and ODM projects.
A: Depending on the selected configuration, the FEBATT BMS can provide overcharge, over-discharge, overcurrent, short-circuit, temperature protection, cell balancing, state-of-charge monitoring, fault reporting, and CAN or RS485 communication.
A:  Depending on the cell model and operating conditions, a FEBATT LiFePO4 battery may provide approximately 2,500–8,000 cycles before capacity declines to around 70–80%, with a possible service life of 5–10 years or longer under suitable use.
A:  Yes. The charger voltage and charging profile must be compatible with the LiFePO4 battery and BMS. An existing lead-acid charger should only be used when its charging parameters meet the battery manufacturer’s requirements.
A: Depending on the battery model and destination market, FEBATT can provide relevant product specifications, test records, UN38.3 transport documentation, MSDS or SDS, and applicable CE, UL, or other compliance documents.
A: Standard FEBATT LiFePO4 batteries can support discharge operation across a broad temperature range, with some models rated from approximately −20°C to 60°C. Low-temperature charging protection, heating functions, or ruggedized designs can be configured for more demanding environments.

IGNITE YOUR COUNTRY'S LITHIUM BATTERY & ENERGY STORAGE MARKET WITH FEBATT

FEBATT, a professional manufacturer and provider of lithium battery energy storage solutions, is committed to delivering high-performance, reliable battery systems to the global market. We are excited to invite you to join us as an exclusive partner in your country or region to collaboratively develop the clean energy storage market and create a steadily growing business together.
When you partner with us, you will enjoy:
Priority Order Processing & Shipping — Respond swiftly to local demand and seize market opportunities with priority processing.
Product Customization Support — We will assist in designing and producing battery solutions tailored to your brand, starting from your very first order.

We have already successfully supported partners across multiple regions in achieving brand growth and increasing profitability. Whether you are a systems integrator, electrical distributor, or entrepreneur looking to build your own brand, FEBATT is your reliable partner, offering stable products and flexible cooperation mechanisms.

Comprehensive Product Range Support — From truck parking batteries to 12V/24V general-purpose lithium batteries, power batteries, and custom solutions, we offer a wide range of products suited for various applications.

Partner with us to deliver reliable energy solutions for businesses and build a sustainable green energy future together.

Contact us now to receive a customized partnership proposal and detailed product information.

Ready to Partner with FEBATT?

Join hundreds of B2B partners worldwide who trust us for reliable lithium battery solutions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Scroll to Top

Professional Battery Solution Supplier

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.